5X PF2257G Engine Oil Filter For Chevy Cruze 1.4L 1.8L 2011-2015 GMC Canyon 3.6L

Description

PF2257G Engine Oil Filter Replacement for Chevy Cruze 1.4L 1.8L 2011-2015 GMC Canyon 3.6L 2017-2020 Buick Encore 1.4L 2013-2020 Replaces 55594651 93185674 5650359
Product Description
Fitment:Oil filter for Buick Encore 1.4L 2013-2020,Chevy Cruze 1.4L 2011-2015,GMC Canyon 3.6L 2017-2020 and more.
Reference number:PF2257G,55576499,55588497,55594651,93185674,5650359,CH10246,72260WS,57674,PS-7027,HU612/2X.
Application:98% filtering efficiency,25 to 30 microns,provide clean oil to engine components.Designed five times more pressure than most engine oil after the oil reaches operating temperatures.
Warm hint:If the filter is not replaced for a long time, the mechanical wear will be aggravated, and the debris and impurities which was generated during operation can not be effectively filtered,That will damage the engine.So please replace oil filter regularly.
Package includes:5 x oil filter element,5 x o-ring.
Fitment
GMC Canyon 3.6L V6 2017-2020
GMC Terrain 1.6L L4 2018-2020
Buick Cascada 1.6L L4 2016-2019
Buick Encore 1.4L L4 2013-2020
Pantiac G3 1.6L L4 2009-2010
Saturn Astra 1.8L L4 2008-2009
Suzuki Swift+ 1.6L L4 2009
Chevy Aveo/Aveo5 1.6L L4 2009-2011
Chevy Cruze 1.4L L4 2011-2015
Chevy Cruze 1.6L L4 2017-2019
Chevy Cruze 1.8L L4 2011-2015
Chevy Cruze Limited 1.4L/1.8L L4 2016
Chevy Equinox 1.6L L4 2018-2020
Chevy Malibu 1.8L L4 2016-2020
Chevy Sonic 1.4L L4 2012-2020
Chevy Sonic 1.8L L4 2012-2018
Chevy Trax 1.4L L4 2013-2020
Chevy Colorado 3.6L V6 2017-2020
Feature
Complete filtration of engine oil, which ensures high performing fuel injectors and long engine life.Optimally screening out 98% of abrasives such as such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.Proven protection for up to 10,000 miles.Cartridge element with pleat media.
Installation
Preparation
Warm up the engine for a few minutes, park the vehicle on a level surface and then turn off the engine.Open the hood, twist off the oil filler cap in the counter clockwise direction and lift up the yellow handled dipstick a few inches.Slide under the car with your oil catch basin.
Drain oil
Raise the vehicle.The oil drain bolt is located at the rear of the gray metal oil pan next to the exhaust pipe.Loosen the oil drain bolt with the 10mm socket and ratcheting wrench by turning it counter clockwise.Allow the old oil to drain out for at least a few minutes then reinsert the oil drain bolt,tight about 14 Nm (10 Ft lbs) of torque.
Change element
The black plastic oil filter housing is located on the driver side of the engine near the oil filler hole and below some hoses.Loosen the oil filter cap with 24mm socket to the 1/2" drive ratcheting wrench.Pull the old filter and o-ring out of the cap.Snap the new cartridge filter in to the bottom of the cap.Push the new o-ring down to the bottom of the threads,lubricating it.Tighten the cap about 25 Nm (18.5 Ft lbs) of torque.